The Molex Premise Networks PowerCat™ 6 U/UTP Cable is a key component of a PowerCat 6 end to end system. Molex PowerCat 6 U/UTP Cable is specifically designed for 10GBase-T Networks. When used in configuration as a full PowerCat 6 UTP end to end system, Molex provides a 25 year system warranty. Features:. Minimizes Alien crosstalk. Complies to Augmented Category 6 requirements.

• Panduit Patch Panel Label Template

Apply to 113 Cord Molex Jobs on Naukri.com, India's No.1 Job Portal. Explore Cord Molex Openings in your desired locations Now! 'If you are labeling a patch panel and the jacks on the patch panel are.65 inches across, you can enter your data into the printer and automatically center all of the information. Some manufacturers offer an Excel or Word template, but Rodden says you still have to 'tweak' it (the template) per printer you are using.

Electrical performance characteristics, including balance, guaranteed across entire frequency range. Packaged in reels for easy installation. RoHS compliant Specifications: Materials 0.58 mm (23 AWG), bare copper wire insulated with halogen free polyethylene.

Two insulated conductors twisted together to form a pair and four such pairs laid up to form the basic unit. Standards North American: ANSI/TIA/EIA-568-B.2-10 (draft 7) International: ISO/IEC 11801 2nd ed. European: EN 50173-1IEC 61156-5 (46C/783/CDV) Flame Rating LS0H: IEC 60332-1, IEC 60754-2, IEC 61034 Applications PowerCat 6 U/UTP Cable is intended to handle highspeed voice, video and data applications including: IEEE 802.3 10Base-T; 100Base-T; 1000BASE-T;10GBase-T IEEE 802.5 16MB; ISDN; FDDI; ATM 1000BASE-TX(ANSI/TIA/EIA-854-2001) 155 Mb/s ATM ANSI X3.263 100 Mb/s 4/16 Mb/s Token Ring Temperature Rating Installation: 0°C to +50°C Operation: -10°C to +60°C Electrical Characteristics Mutual Capacitance: @ 800Hz Nom.

48nF/km DC resistance max: 1 min/1000V Skew. Consolidation Points or Multi-User Telecommunications Outlets (MUTO) are intended to provide increased flexibility and economy for installations where open office spaces require frequent reconfiguration. Consolidation Points are intended for interconnection between horizontal cables extending from building pathways and horizontal cables extending into furniture pathways. Consolidation Point enclosures are frequently required to be installed in ceiling voids or raised floors. The advantage of a MUTO is that it provides a completely modular solution for work area changes. It provides customers with easy access for work area changes.

MUTO ‘s should not be installed in ceiling spaces or raised floors to allow easy access and modularity. Note: Copper work area cables connected to a MUTO shall meet the requirements of TIA/EIA 568 B-3 and ISO. Molex Premise Networks Consolidation Point/MUTO Enclosure features 8 shuttered PowerCat 6A modules housed in a rugged steel enclosure, which protects incoming cable, but allows ready access to the Telecommunications Outlet links. Two enclosures may be interconnected allowing for expansion. The PowerCat 6A Shielded DataGate Jack was specifically designed for high-speed data transmission. Offering superior alien cross-talk suppression and enhanced EMI protection. The connector provides a spring loaded shutter that protects from dust and contaminants but the spring loaded design also ejects improperly seated patch cords.

Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile.

Utilizing patented IDC V-shaped contacts that flex not fatigue when terminated, the RJ-45 Keystone Jack is compatible with any product that accepts the standard keystone profile. Molex PowerCat 5e Shielded Patch Cords are key components of the PowerCat 5e shielded end-to-end solution.

Molex PowerCat 5e Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 5e patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on Boots. Features:.

4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots. Suitable for EIA 568A or 568B wiring. PVC sheath.

RoHS Complian Specificatiopns: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire. Screen material: Aluminum/polyester shield with tinned copper drain wire. Nom. O.D.: max 5.5 mm.

Sheath: Polyvinylchloride (PVC). Bend radius: 8 X O.D. Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles. RJ45 plug material: Clear polycarbonate (PC). Boot material: Clear polyvinylchloride (PVC). Contact material: 0.35 mm thick copper.

Contact plating: 1.27μm gold. RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics. Max voltage: 150 VAC (max). Max current: 1.5A @ 25° C Commerical Standards.

ISO/IEC 11801 2nd Ed Amd 1 Class D. TIA-568-C.2 Cat. 5e, EN50173 Cat.5e Pending Approvals. UL 1863; CSA C22.2 Fire Propagation Tests.

CM UL 1685, CSA FT1. Molex PowerCat 5e Shielded Patch Cords are key components of the PowerCat 5e shielded end-to-end solution. Molex PowerCat 5e Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 5e patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on Boots.

Features:. 4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots.

Suitable for EIA 568A or 568B wiring. PVC sheath. RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire. Screen material: Aluminum/polyester shield with tinned copper drain wire. Nom. O.D.: max 5.5 mm.

Sheath: Polyvinylchloride (PVC). Bend radius: 8 X O.D. Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles. RJ45 plug material: Clear polycarbonate (PC). Boot material: Clear polyvinylchloride (PVC).

Contact material: 0.35 mm thick copper. Contact plating: 1.27μm gold. RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics.

Max voltage: 150 VAC (max). Max current: 1.5A @ 25° C Commerical Standards. ISO/IEC 11801 2nd Ed Amd 1 Class D. TIA-568-C.2 Cat. 5e, EN50173 Cat.5e Pending Approvals:. UL 1863; CSA C22.2 Fire Propagation Tests:. CM UL 1685, CSA FT1.

Molex PowerCat 5e Shielded Patch Cords are key components of the PowerCat 5e shielded end-to-end solution. Molex PowerCat 5e Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 5e patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on Boots.

Features:. 4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots.

Suitable for EIA 568A or 568B wiring. PVC sheath. RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire. Screen material: Aluminum/polyester shield with tinned copper drain wire. Nom.

O.D.: max 5.5 mm. Sheath: Polyvinylchloride (PVC). Bend radius: 8 X O.D.

Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles. RJ45 plug material: Clear polycarbonate (PC). Boot material: Clear polyvinylchloride (PVC). Contact material: 0.35 mm thick copper. Contact plating: 1.27μm gold.

RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics. Max voltage: 150 VAC (max). Max current: 1.5A @ 25° C Commerical Standards. ISO/IEC 11801 2nd Ed Amd 1 Class D. TIA-568-C.2 Cat. 5e, EN50173 Cat.5e Pending Approvals:.

UL 1863; CSA C22.2 Fire Propagation Tests. CM UL 1685, CSA FT1. Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks.

The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. Features:.

4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots. Suitable for EIA 568A or 568B wiring. PVC sheath.

RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire.

Screen material: Aluminum/polyester shield with tinned copper drain wire. Nom. O.D.: max 6.3mm. Sheath: Polyvinylchloride (PVC). Bend radius: 8X O.D. Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles.

RJ45 plug material: Clearpolycarbonate (PC). Boot material: Clear polyvinylchloride (PVC). Contact material: 0.35 mm thick copper. Contact plating: 1.27 μm gold. RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics. Max voltage: 150 VAC (max).

Max current: 1.5A @ 25°C Commerical Standards. ISO/IEC 11801 2nd Ed Amd 1 Class E, TIA-568-C.2 Cat. 6, EN50173 Cat.6 Pending Approvals. UL 1863; CSA C22.2 Fire Propagation Tests. CM UL 1685, CSA FT1.

Panduit Patch Panel Label Template

Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. Features:. 4 pair 26 AWG stranded copper wire.

Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots.

Suitable for EIA 568A or 568B wiring. PVC sheath. RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire. Screen material: Aluminum/polyester shield with tinned copper drain wire.

Nom. O.D.: max 6.3mm. Sheath: Polyvinylchloride (PVC).

Bend radius: 8X O.D. Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles. RJ45 plug material: Clearpolycarbonate (PC). Boot material: Clear polyvinylchloride (PVC). Contact material: 0.35 mm thick copper. Contact plating: 1.27 μm gold.

RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics. Max voltage: 150 VAC (max). Max current: 1.5A @ 25°C Commerical Standards.

ISO/IEC 11801 2nd Ed Amd 1 Class E, TIA-568-C.2 Cat. 6, EN50173 Cat.6 Pending Approvals. UL 1863; CSA C22.2 Fire Propagation Tests. CM UL 1685, CSA FT1.

Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. Features:.

4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots. Suitable for EIA 568A or 568B wiring. PVC sheath. RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire.

Screen material: Aluminum/polyester shield with tinned copper drain wire. Nom.

O.D.: max 6.3mm. Sheath: Polyvinylchloride (PVC).

Bend radius: 8X O.D. Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles. RJ45 plug material: Clearpolycarbonate (PC). Boot material: Clear polyvinylchloride (PVC).

Contact material: 0.35 mm thick copper. Contact plating: 1.27 μm gold. RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics.

Max voltage: 150 VAC (max). Max current: 1.5A @ 25°C Commerical Standards. ISO/IEC 11801 2nd Ed Amd 1 Class E, TIA-568-C.2 Cat.

6, EN50173 Cat.6 Pending Approvals. UL 1863; CSA C22.2 Fire Propagation Tests. CM UL 1685, CSA FT1. Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire.

Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. Features:.

4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots. Suitable for EIA 568A or 568B wiring. PVC sheath. RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire.

Screen material: Aluminum/polyester shield with tinned copper drain wire. Nom. O.D.: max 6.3mm.

Sheath: Polyvinylchloride (PVC). Bend radius: 8X O.D. Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles. RJ45 plug material: Clearpolycarbonate (PC). Boot material: Clear polyvinylchloride (PVC).

Contact material: 0.35 mm thick copper. Contact plating: 1.27 μm gold. RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics. Max voltage: 150 VAC (max). Max current: 1.5A @ 25°C Commerical Standards. ISO/IEC 11801 2nd Ed Amd 1 Class E, TIA-568-C.2 Cat. 6, EN50173 Cat.6 Pending Approvals.

UL 1863; CSA C22.2 Fire Propagation Tests. CM UL 1685, CSA FT1. Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution. Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features:. 4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots. Suitable for EIA 568A or 568B wiring. PVC sheath.

RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire. Screen material: Aluminum/polyester shield with tinned copper drain wire. Nom. O.D.: max 6.3mm. Sheath: Polyvinylchloride (PVC).

Bend radius: 8X O.D. Operating temperature range: -20°C to 60°C Plug.

MIN operating life: 750 insertion cycles. RJ45 plug material: Clearpolycarbonate (PC). Boot material: Clear polyvinylchloride (PVC). Contact material: 0.35 mm thick copper. Contact plating: 1.27 μm gold.

RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics. Max voltage: 150 VAC (max).

Max current: 1.5A @ 25°C Commerical Standards. ISO/IEC 11801 2nd Ed Amd 1 Class E, TIA-568-C.2 Cat. 6, EN50173 Cat.6 Pending Approvals. UL 1863; CSA C22.2 Fire Propagation Tests.

CM UL 1685, CSA FT1. Molex PowerCat 6 Shielded Patch Cords are key components of the PowerCat 6 shielded end-to-end solution.

Molex PowerCat 6 Patch Cords are designed to support high speed networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

Features:. 4 pair 26 AWG stranded copper wire. Pre-terminated with RJ45 plugs. Slim clear anti-snag slip on boots. Suitable for EIA 568A or 568B wiring.

PVC sheath. RoHS Compliant Specifications: Mechanical Characteristics Cable. Conductor size: 26 AWG stranded copper wire. Screen material: Aluminum/polyester shield with tinned copper drain wire.

Nom. O.D.: max 6.3mm. Sheath: Polyvinylchloride (PVC). Bend radius: 8X O.D. Operating temperature range: -20°C to 60°C Plug. MIN operating life: 750 insertion cycles.

RJ45 plug material: Clearpolycarbonate (PC). Boot material: Clear polyvinylchloride (PVC). Contact material: 0.35 mm thick copper. Contact plating: 1.27 μm gold. RJ45 plug dimensions compliant with: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Characteristics. Max voltage: 150 VAC (max).

Max current: 1.5A @ 25°C Commerical Standards. ISO/IEC 11801 2nd Ed Amd 1 Class E, TIA-568-C.2 Cat. 6, EN50173 Cat.6 Pending Approvals. UL 1863; CSA C22.2 Fire Propagation Tests.

CM UL 1685, CSA FT1. PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be color coded to match jack outlets. Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability.

PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be color coded to match jack outlets.

Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability. PowerCat 6 Angled Patch Panels are ideal for installations of high density or which utilize extensive side and end-of-the-rack cable management. The angled feature provides enhanced port access and minimizes patch cord bend radius to the rack. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each RJ45 port features a patented spring-loaded shutter and can be color coded to match jack outlets with the use of optional port icons. Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability. The 48 Port (2U) PowerCat 6A Shielded Patch Panel is made from robust sheet metal.

It is supplied with robust removable rear cable management trays for cable strain relief and neat cable dressing. Port numbering is provided on the front and rear of the panel and individual ports may be color coded using connector icon labels for site specific network administration. The PowerCat 6A Shielded Patch Panel features the unique DataGate™ Shielded connector.

This shielded connector offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilizing robust die-cast zinc alloy connector body housing. This shielded connector also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring loaded design also ejects improperly seated patch cords.

The shielded connector is dual color coded for either 568A or 568B wiring schedules. The DataGate Power Cat 6A Shielded connector was specifically developed for high-speed data transmission; designed to exceed the highest electrical performance standards in the industry. The 48 Port PowerCat 6A Angled Shielded Patch Panel is made from robust sheet metal. It is also supplied with robust removable rear cable management trays for cable strain relief and neat cable dressing. Port numbering is provided on the front and rear of the panel and individual ports may be color coded using connector icon labels for site specific network administration.

The PowerCat 6A Shielded Patch Panel features the unique DataGate™ Shielded connector. This shielded connector offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilizing robust die-cast zinc alloy connector body housing. This shielded connector also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring loaded design also ejects improperly seated patch cords. The shielded connector is dual color coded for either 568A or 568B wiring schedules. The DataGate PowerCat 6A Shielded connector was specifically developed for high-speed data transmission; designed to exceed the highest electrical performance standards in the industry. The DataGate PowerCat 6A Shielded connector is also backwards compatible with Shielded C6 and C5e systems. The angled design provides enhanced port access and minimizes patch cord bend radius whilst also eliminating the need for horizontal cable rack mangers, and therefore frees up rack space for higher port density.

The Shielded 1U 24 Port Unloaded Keystone Patch Panel is shipped unloaded and can be configured to provide the exact number of modular ports. The Patch Panel is made of steel sheet and can accept 24 shielded and unshielded Keystone modules. The Cable management bar is also made of steel and equipped with an earth screw. The front of the panel is equipped with a transparent holder for port labelling.

Keystone jacks (sold separately) can be terminated to the cable and then snapped into the patch panel. The Molex PowerCat Unloaded DataGate Patch Panels can be configured to provide the exact number of modular ports required. DataGate Category 5E UTP, Category 6 UTP, or Category 6A shielded jacks can be terminated to cable and then snapped into this DataGate patch panel. The patch panel and rear cable manager are constructed of cold-rolled steel for strength and durability.

The Molex PowerCat Unloaded DataGate Patch Panels can be configured to provide the exact number of modular ports required. DataGate Category 5E UTP, Category 6 UTP, or Category 6A shielded jacks can be terminated to cable and then snapped into this DataGate patch panel. The patch panel and rear cable manager are constructed of cold-rolled steel for strength and durability.

The Molex PowerCat Unloaded DataGate Patch Panels can be configured to provide the exact number of modular ports required. DataGate Category 5E UTP, Category 6 UTP, or Category 6A shielded jacks can be terminated to cable and then snapped into this DataGate patch panel. The patch panel and rear cable manager are constructed of cold-rolled steel for strength and durability.